G80 3mm da 2mm Galvanized Lashing Sarkar High Tensile Alloy Karfe Dagawa Link Sarkar for Electric Hoist
G80 3mm da 2mm Galvanized Lashing Sarkar High Tensile Alloy Karfe Dagawa Link Sarkar for Electric Hoist
Kashi
Dagawa da bulala, sarka mai ɗagawa.gajeriyar sarkar mahada, dagawa sarkar mahada,Sarkar daraja T, Sarkar DAT Grade,Sarkar DT, DIN EN 818-7short link sarkar domin dagawa dalilai,sarkar juzu'i mai kyau,gami karfe sarkar
Aikace-aikace
Daukewa da bulala, ɗaga kaya, ɗaure lodi
Kamar yadda wani zagaye karfe mahada sarkar manufacturer na shekaru 30, mu factory ya kasance tare da kuma bauta wa da matukar muhimmanci lokaci na kasar Sin sarkar yin masana'antu juyin halitta abinci ga ma'adinai (kwal mine musamman), nauyi dagawa, da kuma masana'antu isar da bukatun a kan high ƙarfi zagaye. sarkar mahada karfe. Ba mu tsaya a matsayin jagorar masana'antar sarkar hanyar haɗin gwiwa ba a China (tare da wadata shekara-shekara sama da 10,000T), amma mun tsaya ga ƙirƙira da ƙirƙira mara tsayawa.
Hoto na 1: sarkar hawan igiyar ruwa
Maɓalli
| 1 | Tsallake tsakiyar layin mahaɗin | l | shine tsayin farar da yawa |
| p | filin wasa ne | dm | shine diamita na kayan kamar yadda aka auna |
| ds | shine diamita na walda | e | shi ne tsawon dimensionally shafi waldi |
| w3 | shine fadin ciki a walda | w2 | shine fadin waje akan walda |
Tebura 1: Sarkar tsayi / girman mahaɗin (mm)
| Nominal size dn | Material diamhar abadatolerance | Pitch | Width | Gauge length of 11 x pn | Wdattijo diamhar abada ds max. | |||
|
pn |
tolerance1) | internal w3 min. | external w2 max. |
l |
tolerance1) | |||
| 4 | ± 0.2 | 12 | 0.25 | 4.8 | 13.6 | 132 | 0.6 | 4.3 |
| 5 | ± 0.2 | 15 | 0.3 | 6.0 | 17.0 | 165 | 0.8 | 5.4 |
| 6 | ± 0.2 | 18 | 0.35 | 7.2 | 20.4 | 198 | 1.0 | 6.5 |
| 7 | ± 0.3 | 21 | 0.4 | 8.4 | 23.8 | 231 | 1.1 | 7.6 |
| 8 | ± 0.3 | 24 | 0.5 | 9.6 | 27.2 | 264 | 1.3 | 8.6 |
| 9 | ± 0.4 | 27 | 0.5 | 10.8 | 30.6 | 297 | 1.4 | 9.7 |
| 10 | ± 0.4 | 30 | 0.6 | 12.0 | 34.0 | 330 | 1.6 | 10.8 |
| 11 | ± 0.4 | 33 | 0.6 | 13.2 | 37.4 | 363 | 1.7 | 11.9 |
| 12 | ± 0.5 | 36 | 0.7 | 14.4 | 40.8 | 396 | 1.9 | 13.0 |
| 13 | ± 0.5 | 39 | 0.8 | 15.6 | 44.2 | 429 | 2.1 | 14.0 |
| 14 | ± 0.6 | 42 | 0.8 | 16.8 | 47.6 | 462 | 2.2 | 15.1 |
| 16 | ± 0.6 | 48 | 0.9 | 19.2 | 54.4 | 528 | 2.5 | 17.3 |
| 18 | ± 0.9 | 54 | 1.0 | 21.6 | 61.2 | 594 | 2.9 | 19.4 |
| 20 | ± 1.0 | 60 | 1.2 | 24.0 | 68.0 | 660 | 3.2 | 21.6 |
| 22 | ± 1.1 | 66 | 1.3 | 26.4 | 74.8 | 726 | 3.5 | 23.8 |
| 1) These tolerances are usually divided into + 2/3 and - 1/3 for both the individul link and thestandard gauge length. | ||||||||
Tebur na 2: Ƙayyadaddun kayan aikin hawan sarkar (WLL)
| Nominal size dn mm | Chain type T t | Chain type DAT t | Chain type DT t |
| 4 5 6 | 0.5 0.8 1.1 | 0.4 0.63 0.9 | 0.25 0.4 0.56 |
| 7 8 9 | 1.5 2 2.5 | 1.2 1.6 2 | 0.75 1 1.25 |
| 10 11 12 | 3.2 3.8 4.5 | 2.5 3 3.6 | 1.6 1.9 2.2 |
| 13 14 16 | 5.3 6 8 | 4.2 5 6.3 | 2.6 3 4 |
| 18 20 22 | 10 12.5 15 | 8 10 12.5 | 5 6.3 7.5 |
| mean stress N/mm2 | 200 | 160 | 100 |
Tebura 3: Ƙirar ƙwaƙƙwarar ƙira ta haɓakar sarƙoƙi da ƙarfi
| Nominal size dn mm | Manufacturing proof force (MPF) kN min. | Breaking force (BF) kN min. |
| 4 | 12.6 | 20.1 |
| 5 | 19.6 | 31.4 |
| 6 | 28.3 | 45.2 |
| 7 | 38.5 | 61.6 |
| 8 | 50.3 | 80.4 |
| 9 | 63.6 | 102 |
| 10 | 78.5 | 126 |
| 11 | 95 | 152 |
| 12 | 113 | 181 |
| 13 | 133 | 212 |
| 14 | 154 | 246 |
| 16 | 201 | 322 |
| 18 | 254 | 407 |
| 20 | 314 | 503 |
| 22 | 380 | 608 |
Table 4: jimlar matuƙar elongation da taurin saman
|
| hoist chain types | ||
| T | DAT | DT | |
| Total ultimate elongation A%min | 10 | 10 | 5 |
| Surface hardness min dn < 7 mm, HV 5 dn = 7 mm to 11 mm, HV 10 dn > 11 mm, HV 10 |
360 360 360 |
500 500 450 |
550 550 500 |
