Grade 80 G80 Mai ɗagawa Mai Buɗaɗɗen Grade 100 G100 Lift Sling PVC Mai Rufaffen Sarkar Ƙarƙashin Ƙarƙashin Ƙarƙashin Tirela Tare da Sarkar Ƙungiya
Grade 80 G80 Mai ɗagawa Mai Buɗaɗɗen Grade 100 G100 Lift Sling PVC Mai Rufaffen Sarkar Ƙarƙashin Ƙarƙashin Ƙarƙashin Tirela Tare da Sarkar Ƙungiya
Kashi
Dagawa da lashing sarkar, sarkar, short link sarkar, zagaye mahada sarkar dagawa, Grade 80 sarkar, sarkar G80, sarkar majajjawa, majajjawa sarkar, DIN 818-2 matsakaici haƙuri sarkar for sarkar majajjawa Grade 8, gami karfe sarkar
Aikace-aikace
Daukewa da bulala, ɗaga kaya, ɗaure lodi
SCIC Grade 80 (G80) sarƙoƙi don ɗagawa an yi su ne bisa ga ka'idodin EN 818-2, tare da nickel chromium molybdenum manganese gami da ƙarfe na DIN 17115; da kyau tsara / saka idanu waldi & zafi-jiyya tabbatar da sarƙoƙi inji Properties ciki har da gwajin ƙarfi, karya ƙarfi, elongation & taurin.
Hoto 1: Girman mahaɗin sarkar daraja 80
Tebur 1: Girman sarkar digiri na 80 (G80), EN 818-2
| diamita | farar | fadi | nauyin naúrar | |||
| maras tushe | haƙuri | p (mm) | haƙuri | ciki W1 | waje W2 | |
| 6 | ± 0.24 | 18 | ± 0.5 | 7.8 | 22.2 | 0.8 |
| 7 | ± 0.28 | 21 | ± 0.6 | 9.1 | 25.9 | 1.1 |
| 8 | ± 0.32 | 24 | ± 0.7 | 10.4 | 29.6 | 1.4 |
| 10 | ± 0.4 | 30 | ± 0.9 | 13 | 37 | 2.2 |
| 13 | ± 0.52 | 39 | ± 1.2 | 16.9 | 48.1 | 4.1 |
| 16 | ± 0.64 | 48 | ± 1.4 | 20.8 | 59.2 | 6.2 |
| 18 | ± 0.9 | 54 | ± 1.6 | 23.4 | 66.6 | 8 |
| 19 | ± 1 | 57 | ± 1.7 | 24.7 | 70.3 | 9 |
| 20 | ± 1 | 60 | ± 1.8 | 26 | 74 | 9.9 |
| 22 | ± 1.1 | 66 | ± 2.0 | 28.6 | 81.4 | 12 |
| 23 | ± 1.2 | 69 | ± 2.1 | 29.9 | 85.1 | 13.1 |
| 24 | ± 1.2 | 72 | ± 2.1 | 30 | 84 | 14.5 |
| 25 | ± 1.3 | 75 | ± 2.2 | 32.5 | 92.5 | 15.6 |
| 26 | ± 1.3 | 78 | ± 2.3 | 33.8 | 96.2 | 16.8 |
| 28 | ± 1.4 | 84 | ± 2.5 | 36.4 | 104 | 19.5 |
| 30 | ± 1.5 | 90 | ± 2.7 | 37.5 | 105 | 22.1 |
| 32 | ± 1.6 | 96 | ± 2.9 | 41.6 | 118 | 25.4 |
| 36 | ± 1.8 | 108 | ± 3.2 | 46.8 | 133 | 32.1 |
| 38 | ± 1.9 | 114 | ± 3.4 | 49.4 | 140.6 | 35.8 |
| 40 | ± 2 | 120 | ± 4.0 | 52 | 148 | 39.7 |
| 45 | ± 2.3 | 135 | ± 4.0 | 58.5 | 167 | 52.2 |
| 48 | ± 2.4 | 144 | ± 4.3 | 62.4 | 177.6 | 57.2 |
| 50 | ± 2.6 | 150 | ± 4.5 | 65 | 185 | 62 |
TS EN 818-2 Siffar 2: Matsayi na 80 (G80) sarkar injiniyoyi
| diamita | aiki iyaka | masana'anta hujja karfi | min. karya karfi |
| 6 | 1.12 | 28.3 | 45.2 |
| 7 | 1.5 | 38.5 | 61.6 |
| 8 | 2 | 50.3 | 80.4 |
| 10 | 3.15 | 78.5 | 126 |
| 13 | 5.3 | 133 | 212 |
| 16 | 8 | 201 | 322 |
| 18 | 10 | 254 | 407 |
| 19 | 11.2 | 284 | 454 |
| 20 | 12.5 | 314 | 503 |
| 22 | 15 | 380 | 608 |
| 23 | 16 | 415 | 665 |
| 24 | 18 | 452 | 723 |
| 25 | 20 | 491 | 785 |
| 26 | 21.2 | 531 | 850 |
| 28 | 25 | 616 | 985 |
| 30 | 28 | 706 | 1130 |
| 32 | 31.5 | 804 | 1290 |
| 36 | 40 | 1020 | 1630 |
| 38 | 45 | 1130 | 1810 |
| 40 | 50 | 1260 | 2010 |
| 45 | 63 | 1590 | 2540 |
| 48 | 72 | 1800 | 2890 |
| 50 | 78.5 | 1963 | 3140 |
| bayanin kula: jimlar tsayin daka na ƙarshe a karya ƙarfi shine min. 20%; | |||
| canje-canje na Ƙimar Load Aiki dangane da zafin jiki | |
| Zazzabi (°C) | WLL % |
| -40 zuwa 200 | 100% |
| 200 zuwa 300 | 90% |
| 300 zuwa 400 | 75% |
| sama da 400 | wanda ba a yarda da shi ba |
