Baƙin Ƙarshe Grade 80 Sarkar Ma'adinai

Baƙin Ƙarshe Grade 80 Ma'adinan Ma'adinai Featured Hoto

Takaitaccen Bayani:

category: zagaye mahada sarkar, zagaye karfe mahada sarkar, zagaye mahada ma'adinai sarkar, DIN 22252 ma'adinai sarkar, ma'adinai conveyor sarkar, jirgin mashaya tsarin

Aika mana imel

Cikakken Bayani

Tags samfurin

Baƙin Ƙarshe Grade 80 Sarkar Ma'adinai

Kashi

Zagaye mahada sarkar, zagaye karfe mahada sarkar, zagaye mahada ma'adinai sarkar, DIN 22252sarkar ma'adinai, sarkar isar ma'adinai, tsarin sarkar ma'adinai

Aikace-aikace

Masu ɗaukar Fuskar Armored (AFC), Beam Stage Loaders (BSL), injinan kan hanya, garmamar kwal, da sauransu.

A matsayinta na kasa mai lamba 1 da ke samar da kwal, kasar Sin ta ga bukatar samar da sarkar ma'adinai masu yawa da yawa, don haka tana karfafa karfin masana'antar sarrafa sarkar karafa ta kasar Sin ta fuskar yawa da inganci. Kamfanin masana'antar sarkar SCIC tare da tarihin samar da sarkar karfe na tsawon shekaru 30 yana da hannu sosai cikin samar da masana'antar kwal na kasar Sin; Ya zuwa yanzu an yarda da sarƙoƙin haɗin gwiwar mu da duk manyan kamfanonin kwal da ma'adinai ta China.

Our zagaye karfe mahada ingancin ana tabbatar ta kowane mataki na samar da sarkar, daga sauti gami karfe sanduna zuwa daidai mahada ƙirƙira da robot, daga kwamfuta walda waldi zuwa da kyau tsara quenching & tempering zafi-magani (sakamakon so ƙarfi da surface taurin) , daga gwajin gwaji zuwa gwaje-gwaje na injiniya akan tabbatar da farfajiya & ingancin ciki.

SCIC zagaye mahada sarkar da aka yi bisa ga China GB/T-12718 misali da factory Technical Bukatun, kazalika da DIN 22252 ko GOST 25996 matsayin da abokan ciniki dalla-dalla.

Ana amfani da sarkar mahaɗin zagaye na SCIC don masu ɗaukar makamai masu sulke (AFC), Beam Stage Loaders (BSL), injinan kan hanya, garmamar kwal da sauran kayan aikin da ke buƙatar irin wannan sarkar.

Abubuwan da ke hana lalata (misali, galvanization mai zafi mai zafi) yana haifar da raguwar kaddarorin injinan sarkar, don haka aikace-aikacen kowane suturar da ba ta da lahani zai kasance ƙarƙashin odar yarjejeniya tsakanin mai siye da SCIC.

Hoto 1: sarkar mahada zagaye

Tebura 1: Girman sarkar mahaɗin zagaye

girman mahada (opp. Weld) d(mm)		farar t(mm)		fadin mahada (mm)		link waldi size (mm)		nauyin naúrar kg/m (~)
maras tushe	haƙuri	maras tushe	haƙuri	ciki b1(min.)	na waje b2(max.)	diamita d1(max.)	tsayi e	nauyin naúrar kg/m (~)
10	± 0.4	40	± 0.5	12	34	10.8	7.1	1.9
14	± 0.4	50	± 0.5	17	48	15	10	4.0
18	± 0.5	64	± 0.6	21	60	19.5	13	6.6
19	± 0.6	64.5	± 0.6	22	63	20	13	7.4
22	± 0.7	86	± 0.9	26	74	23.5	15.5	9.5
24	± 0.8	86	± 0.9	28	79	26	17	11.6
26	± 0.8	92	± 0.9	30	86	28	18	13.7
30	± 0.9	108	± 1.1	34	98	32.5	21	18.0
34	± 1.0	126	± 1.3	38	109	36.5	23.8	22.7
38	± 1.1	126	± 1.3	42	121	41	27	30.1
38	± 1.1	137	± 1.4	42	121	41	27	29.0
42	± 1.3	137	± 1.4	48	137	45	30	36.9
42	± 1.3	146	± 1.5	48	137	45	30	36.0
42	± 1.3	152	± 1.5	46	133	45	30	35.3
bayanin kula:Lsarkar girman anger akwai akan tambaya. Girman mahaɗin (d) da za a auna a hanyar haɗin kai tsaye opposite link weld. Faɗin mahaɗin (b1 & b2) don auna shi daga mahaɗin walda.

Table 2: zagaye mahada sarkar inji Properties

girman sarkar *dxt* (mm)	sarkar daraja	karfin gwadawa (kN)	elongation karkashin gwajin karfi % (max.)	karya karfi (kN)	elongation a karaya % (minti)	mafi ƙarancin karkata (mm)
10 x40	S	85	1.4	110	14	10
	SC	100	1.6	130
	SCC	130	1.9	160
14 x50	S	150	1.4	190	14	14
	SC	200	1.6	250
	SCC	250	1.9	310
18 x64	S	260	1.4	320	14	18
	SC	330	1.6	410
	SCC	410	1.9	510
19 x 64.5	S	290	1.4	360	14	19
	SC	360	1.6	450
	SCC	450	1.9	565
22 x86	S	380	1.4	480	14	22
	SC	490	1.6	610
	SCC	610	1.9	760
24 x86	S	460	1.4	570	14	24
	SC	580	1.6	720
	SCC	720	1.9	900
26 x92	S	540	1.4	670	14	26
	SC	680	1.6	850
	SCC	850	1.9	1060
30 x108	S	710	1.4	890	14	30
	SC	900	1.6	1130
	SCC	1130	1.9	1410
34 x 126	S	900	1.4	1140	14	34
	SC	1160	1.6	1450
	SCC	1450	1.9	1810
38 x126 38 x137	S	1130	1.4	1420	14	38
	SC	1450	1.6	1810
	SCC	1810	1.9	2270
42 x137 42 x146 42 x152	S	1390	1.4	1740	14	42
	SC	1770	1.6	2220
	SCC	2220	1.9	2770